消防管道靜壓是消防系統中一個重要組成部分，它使消防水系統保持在指定的壓力，滿足消防隊在發生火災時所需的水壓需求。消防水系統內保持一定的水壓，可以保證消防水源的有效利用，以及滅火管道供水動力的充足。
消防管道的靜壓是指系統的水壓穩定性，在不同流量條件下，消防管道的靜壓是由流量調節閥調節的，調節閥的設置會直接影響消防管道的靜壓。
消防管道的靜壓通常在0.1MPa到1.2MPa之間，是根據消防水系統的流量、效率、水泵噴射壓力、回水壓力以及管道的材料和運行狀況和其他因素確定的。
考慮到消防管道的工作狀態，如果消防管道出現靜壓超過或低于規定數值，就應該及時調節，以確保消防水源的可靠性和壓力場的穩定性。調節消防管道靜壓，常用的方法是通過調節流量調節閥來調節，可以事先確定調節閥的壓力，然后根據實際的情況適當調整。
另外，在調整消防管道靜壓時，還要注意以下幾點 ：首先，要定期檢查管道靜壓，隨時監測管道內壓力情況，防止管道系統造成滲漏或損壞；其次，調節消防管道靜壓時，應注意數值要在管道的設計水壓值的范圍內；最后，定期檢查管道系統的可靠性，以免造成不可知的損失。
消防管道靜壓的正常水壓和調節是消防系統的正常運行的重要保證，正確的消防管道靜壓調節，可以保障消防系統有效、安全的運行，為消防救援工作提供及時、有力的支持。
Static pressure of firefighting pipeline is an important part of firefighting system, which keeps firefighting water system in designated pressure to meet the water pressure requirement of fire brigade when fire happens. Keeping certain pressure in firefighting water system can insure the effective utilization of firefighting water source and the sufficient water driving power of firefighting pipeline.
Static pressure of firefighting pipeline refers to the stability of water pressure of the system. Under different flow conditions, the static pressure of firefighting pipeline can be regulated by flow control valve, and the setting of control valve will directly influence the static pressure of firefighting pipeline.
Static pressure of firefighting pipeline is usually between 0.1MPa and 1.2MPa, which can be determined according to flow, efficiency, water pump jetting pressure, return water pressure, material and operating condition of pipeline and other factors.
Considering the working condition of firefighting pipeline, if the static pressure is over or under the stipulated values, it should be regulated immediately to make sure the reliability of firefighting water source and the stability of pressure field. The commonly used method to regulate the static pressure of firefighting pipeline is to regulate flow control valve. The pressure of control valve can be determined upfront, and then proper adjustment would be made according to the actual situation.
Besides, several attention points should be paid to when regulating the static pressure of firefighting pipeline: Firstly, the static pressure of pipeline should be inspected regularly, and water pressure inside the pipeline should be monitored all the time to avoid leakage or damage of pipeline system; Secondly, when regulating the static pressure of firefighting pipeline, the numerical value should be within the range of design pressure of the pipe; Lastly, the reliability of pipeline system should be inspected regularly to prevent unknown losses.
Normal pressure and regulation of firefighting pipeline is the important guarantee of normal operation of firefighting system. The correct regulation of static pressure of firefighting pipeline can insure the effective and safe operation of firefighting system, and provide timely and powerful support for firefighting rescue.
浙江班尼戈智慧管網公司采用德國頂尖管道技術，有國家級CNAS實驗室，較大的快裝EP碳鋼管路、薄壁不銹鋼管路，消防管道靜壓，快裝和EP消防管道，不銹鋼管道和管件，不銹鋼管道生產廠家，管路連接技術研發。